SRT MiniServer
User guide
×
Menu
Index

7.9. RIST Server

SRTMiniServer includes a RIST-addon. When enabled, the server can accept RIST-connections.
Currently, only Advanced-profile is supported.
 
NOTES:  The Proxy-mode does not support RIST. Therefore, for RIST connections, you must use either a local address or a public IP.
We will soon add the ability to operate without a dedicated IP address for RIST as well.
 

Start

Use button "RIST server" for activate addon. After this RIST server will be listen UDP-port 7000.
 
 
 

Configuration

For RIST-configuration use "Advanced settings".
You need re-start RIST addon to apply the new settings.
 
 
rist_port = 7000
UDP-port for listen incoming connections.
 
rist_buffer = 500
sets the buffer size in milliseconds. The buffer size will work best at four to seven times the ping time. This allows time for requests for the retransmission of a lost or corrupted packet, and the subsequent retransmission of its replacement.
 
 
Also you can use other RIST-parameters from the librist library, just by adding the prefix "rist_".